Cue-Link

Your One-Stop Source For StarV3™ Products

 

Menu

Home

About StarV3™

Products

Store

 

Links

StarV3 Home

Star OS Manual

VNC
Support Forums

Wiki
Additional Community Supported Documentation

Proudly Associated with the Valemount Networks Corporation

StarV3™ Base features and abilities
  • Management is via SSH, making use of an easy to use point-and-click interface
  • Support for multiple network interfaces
  • Support for multiple IPs on each interface
  • Complete Atheros support (listed below)
  • Static routing
  • Policy (source) based routing
  • 802.1d bridging with STP
  • 802.1q VLAN
  • Ethernet-over-ip (EoIP) support via VDS
  • Dynamic routing (RIP, OSPF, and OLSR)
  • Mesh networking via OLSR
  • Captive portal / Hotspot (WISPr attribute support)
  • Network monitoring via tcpdump and ping
  • Beacon real-time network traffic monitor
  • Command-shell with common networking tools
  • DHCP client and server w/ static IP assignments
  • Firewall and Port Forwarding (via internal language, or iptables pass through)
  • NAT, and Static 1:1 NAT
  • Class-based Queuing (CBQ)
  • Layer-7 filtering (not on single port boards)
  • Recursive DNS
  • PPPoE server (not on single port boards)
  • Live over-the-wire[less] firmware upgrading

StarV3™ Atheros features and abilities

  • Complete support for a wide range of Atheros PCI, mPCI, and PCIe devices
  • Strives to be compliance based with both FCC and CE regulations
  • Card disable support
  • Detailed association display with live stats
  • Support over 200 associations per card
  • Link distances up to 230 km
  • Full Duplex PtP (utilizes two cards)
  • Atheros SuperA/G (h/w Compression, Aggregation, and Encryption)
  • 108M Turbo (Static and Dynamic)
  • Adaptive Radio (AR)
  • Adaptive Noise Immunity (ANI)
  • Robust rate control
  • Auto, Fixed, and MAX rate support
  • Fixed and Auto channel selection
  • Channel scanlist filter
  • Cloaking (Spectrum management; 5, 10, and 20 MHz wide channels)
  • 802.11e QoS
  • 802.11h TPC, DFS v1, and DFS v2 for FCC3, ETSI, and MKK4
  • Dynamic WDS
  • 802.11i WPA & WPA2/RSN (PSK, EAP-TLS, EAP-TTLS, and EAP-PEAP)
  • Built-in WPA PSK and EAP authentication
  • Radius-based WPA EAP authentication
  • Shared-key and Open-system WEP (40, 64, and 128-bit keys)
  • Static ACLs
  • Radius ACLs w/ accounting and session limits
  • Managed support (enhanced client control)
  • Low signal threshold to eliminate clutter of distant weak radios.
  • High signal threshold to eliminate clutter of nearby strong radios.

Atheros chipsets supported by StarV3™

  • MAC Revisions
    • AR5212A (AR5001X+), AR5212A (AR5002X)
    • AR5213A (AR5004X), AR5213A (AR5004G)
    • AR2413A (AR5005G), AR2414A (AR5005GS)
    • AR5413A (AR5006X), AR5414A (AR5006XS)
    • AR2315A (AR5006G), AR2316A (AR5006GS)
    • AR2413A, AR5413A, and AR2315A are 'LITE' chipsets and as such do not support Turbo, or SuperA/G features.
       
  • Analog Revisions
    • AR5111, AR5112, AR2112, AR2413, AR2315, AR5413, AR5424
       
  • RF Bands
    • 900Mhz - 930Mhz (using Ubiquiti SR9), limited to legal bands by firmware
    • 2.3Ghz - 2.7Ghz, limited to legal bands by firmware
    • 4.9Ghz - 6.1Gh, limited to legal bands by firmware
       
Acceptance Mark Copyright © 2003  Cue-Link Corp.  All rights reserved.
Revised: 05/07/09
Back to Top